Rockwell Automation FlexPak 3000 Power Module Version 4.2 - Manual (Page 61)

CHANGING PARAMETER VALUES
49’1340 e FlexPak 3000 5-3
2) Press ENTER to accept the current selection or press CANCEL to restore the original
value/selection (230 VAC) and then display the previous menu before entering the value
entry screen.
3) If the selected choice (choice at cursor) is OTHER:
a) Press ENTER.
b) Use ⇐ and ⇒ keys to select the digit position or the sign within the entry field.
No wrapping (i.e. from LSD to MSD and vice versa).
When the ⇐ or ⇒ key is pressed, before the cursor position changes
to the new position, the number at the old cursor position is first accepted.
ACTIVE KEYS:
ENTER
<------- 
1) The new value/selection is accepted and the entry field is set to the
new value/selection (just accepted).
2) The display remains in the value entry screen.
"
UP Moves the cursor up and/or scrolls down; when in a value entry screen,
it increments the digit at the cursor or toggles the sign plus "+" or minus "-"
when the cursor is positioned over the sign.
!
DOWN Moves the cursor down and/or scrolls up; when in a value entry screen,
it decrements digit at cursor or toggles the sign plus "+" or minus " − "
when the cursor is positioned over the sign.
%
LEFT Moves the cursor left 1 position to select a digit position or a sign within the entry
field.
&
RIGHT Moves the cursor right 1 position to select the digit position or the sign within the
entry field of a value entry screen.
CANCEL
x
Restores the original value and the current value entry screen remains displayed
if an entry is in progress,
i.e. the value has been altered but not yet accepted (using ENTER).
-OR-
The previous menu before entering the value entry screen is displayed if no entry
is in progress, i.e. the value has not yet been altered.
HELP
?
Provides help text on the particular parameter.