Rockwell Automation GV3000/SE AC Drive AutoMax Network Communication Board, M/N 2AX3000 User Manual

Page 93

Index-2

AutoMax Network Communication Option Board for the GV3000/SE AC Drive

GV3000/SE drive, connecting to network, 2-38

I/O update enable logic summary, 4-2
input data, transfer rates, 4-1
installation, 2-1

1 to 20 HP @ 230 VAC drives, 2-12
1 to 5 HP @ 460 V drives, 2-4
100 to 150 HP @ 460 VAC drives, 2-25
15 to 25 HP @ 460 V drives, 2-21
2 to 15 Amp drives, 2-32
200 to 400 HP @ 460 VAC drives, 2-29
24 to 30 Amp drives, 2-32
25 to 60 HP @ 460 V drives, 2-21
30 to 100 HP @ 230 VAC drives, 2-16
50 to 100 HP @ 460 VAC drives, 2-25
7.5 to 10 HP @ 460 VAC drives, 2-8
75 to 200 HP @ 460 VAC drives, 2-16

jumper

locations, 2-3
settings, 2-3

load, terminating, 1-2

installing, 2-38

loss of network communication, 3-2

network

and other control sources, 4-1
configuring communication, 3-1
drop cable, 1-1
option board description, 1-1
parameter descriptions, 3-2
reference source, 3-7
register organization, 4-5
response to communication loss, 3-4
transfer rates, 4-1

Network Communications Module, 1-2
Network Connection Type (P.061), 3-1, 3-3
Network Drop Number (P.060), 3-1, 3-2

Network Output Register 1 Source (P.066), 3-9
Network Output Register 2 Source (P.067), 3-9
Network Output Register 3 Source (P.068), 3-9
Network Output Register 4 Source (P.069), 3-9

Option Port: Communication Loss Response

(P.062), 3-2, 3-4

Option Port: Network Reference Source (P.063),

3-7

Option Port: Network Trim Reference Source

(P.064), 3-8

Option Port: Type and Version (P.065), 3-8
organization, network register, 4-5
output data, transfer rates, 4-2

P.060 Network Drop Number, 3-2
P.061 Network Connection Type, 3-3
P.062 Option Port: Communication Loss

Response, 3-4

P.063 Option Port: Network Reference Source, 3-7
P.064 Option Port: Network Trim Reference

Source, 3-8

P.065 Option Port: Type and Version, 3-8
P.066 Network Output Register 1 Source, 3-9
P.067 Network Output Register 2 Source, 3-9
P.068 Network Output Register 3 Source, 3-9
P.069 Network Output Register 4 Source, 3-9
parameter

descriptions, 3-2
network inaccessible, 4-6
processing error status flag, 4-4
register cross reference, B-1
unacceptable values, 4-4

passive tap, 1-1, 1-2

installing, 2-38

phone support, 1-2
pulse encoder counter register, 4-5

read only registers, 4-5

Drop_1, 5-2
Drop_2, 5-8
Drop_3 (vector), 5-12
Drop_3 (volts/hertz), 5-15