Rockwell Automation GV3000/SE AC Drive AutoMax Network Communication Board, M/N 2AX3000 - Manual (Page 55)

3-8 AutoMax Network Communication Option Board for the GV3000/SE AC Drive
P.064 Option Port: Network Trim Reference Source
This parameter
specifies where the
drive gets its trim
reference when the
option port is
selected as the
control source
(P.000 = OP). Parameter Range: 0 = Direct trim reference register
1 to 8 = Broadcast register 1 to 8, respectively
Default Setting: 0
Parameter Type: Configurable
Refer also to parameters: P.063 Option Port: Network Reference Source
U.000 Torque Reference Source
The option port trim reference can be used as the outer control loop reference or the
speed trim reference (see P.014 Trim Reference Source in the drive software
instruction manual).
If P.064 = 0, the trim reference is from register 34 of the first drop image.
If P.064 = 1 to 8, the trim reference is from network broadcast registers 1 through 8,
respectively. For a description of the broadcast registers, refer to the
AutoMax
Network Communications Module manual (J2-3001).
In V/Hz regulation, the trim reference represents speed in hertz scaled 0 to 4095 for
0 to Maximum Speed (P.004).
In vector regulation, the trim reference represents speed scaled 0 to 4095 for 0 to
Top Speed (U.017). When used for the outer control loop, the value should be
scaled based on the scaling of the selected feedback
See the drive software instruction manual for more information on drive regulation.
P.065 Option Port: Type and Version
This parameter
displays the option
type and the
software version
number of the option
board. Parameter Range: N/A
Default Setting: N/A
Parameter Type: Read-only
Refer also to parameters: N/A
The display format is N.vvv, where N represents the option type (1 = RMI,
2 = AutoMax network, 4 = DeviceNet network, and 5 = ControlNet network) and v
represents the software version number.
For example, if 2.103 is displayed, it means the drive is using the AutoMax network
option and is running version 1.03 software.