Rockwell Automation GV3000/SE AC Drive AutoMax Network Communication Board, M/N 2AX3000 - Manual (Page 7)

Introduction 1-1
C
HAPTER
1
Introduction
This manual describes the AutoMax™ Network Communication Option board
(M/N 2AX3000). This board allows a GV3000/SE™ drive to be operated and
monitored over the AutoMax network.
For normal operation, the GV3000/SE drive can be completely controlled using the
Network Option board. This allows use of only a network interface connection,
hardwired emergency stop, and three-phase input and output power wiring. Start,
stop, reset, fault codes, and complete control can be done over the AutoMax network.
1.1 AutoMax Network Communication Option Board
Description
The AutoMax Network Communication Option board (M/N 2AX3000) ships with one
Network Drop Cable (M/N 2NC3000). The Network Drop Cable connects the
GV3000/SE drive to the passive tap.
The Network Option board makes the GV3000/SE drive a slave drop on the AutoMax
network. It is a printed circuit board assembly that mounts inside a GV3000/SE drive
and connects to the drive’s Regulator board using a ribbon cable. The Network Option
board is powered from the standard drive power supply.
The Network Option board has a two-connection terminal strip that connects to a
single twisted-pair Network Drop Cable (M/N 2NC3000). The Network Drop Cable is
connected to a passive tap on the AutoMax network.
1.2 Where to Find Additional Information
You must be familiar with all the instruction manuals that describe your system
configuration. They can include:
• GV3000/SE AC General Purpose (Volts/Hertz) and Vector Duty Drive Software
Start-Up and Reference Manual (D2-3359)
• GV3000/SE AC Power Modules Hardware Reference, Installation, and
Troubleshooting instruction manual (D2-3360)
• GV3000/SE 230 VAC 1-20 HP General Purpose (Volts/Hertz) and Vector Duty Drive
Software Start-Up and Reference Manual (D2-3387)
• GV3000/SE AC Drive Hardware Reference, Installation, and Troubleshooting,
1-20 HP @ 230 VAC (D2-3388)
• GV3000/SE 460 VAC General Purpose (Volts/Hertz) and Vector Duty Drive
Software Start-Up and Reference Manual (D2-3391)
• GV3000/SE AC Drive Hardware Reference, Installation, and Troubleshooting
75-200 HP @ 460 VAC (D2-3392)