Det-Tronics S3 Graphics - Manual (Page 83)

11-2 EAGLE QUANTUM PREMIER CONFIG.
Version 6.0
EAGLE QUANTUM PREMIER CONFIG.
Configuration Screen
The main configuration screen is divided into two functional areas. The top area, which has a schematic
representation of the Local Operating Network (LON™) on which all of the field devices reside and the lower
area which contains context sensitive buttons for accessing features and performing functions.
On a new loop, as represented in the sample above (in blue), the LON schematic has a single device, the
controller, shown at the upper left corner and addressed as “Node 1”. This node is automatically placed on the
LON because without it no further configuration or monitoring can take place.
Button Bar Overview
There are two button bars located at the bottom of the
screen, the “Command Bar” and the “Configuration Bar”.
The Command Bar is used to create, query or directly
manipulate LON devices.
The Configuration Bar is used to create, duplicate or delete devices
and to reconcile their physical and logical LON addresses.
The functionality of each button is described on the following
pages.
COMMAND BAR • DEVICES FOUND EQP CONFIGURATION