Det-Tronics S3 Graphics - Manual (Page 242)

EQP LOGIC EDITOR 13-17 EQP LOGIC EDITOR
Version 6.0
Tab 1
Is for “Coils” which typically represent “Outputs” in a Modbus PLC. Coil
addresses start with “0”.
Tab 2
Is for “Inputs” which typically represent discrete input cards in a
Modbus PLC. Input addresses start with “1”.
Tab 3
Is for registers (16 bit words) that occupy an address range
beginning with 40,001.
Registers can be used either as a whole “16 bit” word
to move an integer value, or as sixteen individual “bits”,
into which boolean “ON/OFF” data can be moved.
When the “All to MB” tab is selected, a hierarchical
list of “sources” is shown on the left hand side of the
dialog box which can be selected for “movement” to
“destinations” in the AB system.
Any item on the list that has a “+” before it has
subordinate items and clicking on the “+” will expand
the list showing all items that make up that category.
Below the list are two buttons that can “Expand” or
“Collapse” all subordinate items in the list for easy
viewing.
The firsts twelve items on the list provide access
to controller status information and the globals
database.
The “LON” item will allow access to all field device
information, the “Relays” item is for accessing the
controllers onboard relay status.
LOGIC EDITOR • CONTROLLER MENU