Det-Tronics S3 Graphics - Manual (Page 232)

EQP LOGIC EDITOR 13-7 EQP LOGIC EDITOR
Version 6.0
Minimize I/O windows on start
This option is used to control the look and feel of the logic simulator on startup. The simulator has two I/O
windows. One is inputs and the other is outputs.
When the simulator starts these windows will normally open full
size. If the checkbox is enabled they will open in the minimized
state.
Show errors/warnings after build
When enabled, the logic editor will automatically display the
“ERROR / WARNINGS VIEWER” at the completion of a project compile (build) listing any problems. This can
also be done manually by using the “Show Errors/Warnings” menu item under the “Project” menu or by using
the “E/W” button on the toolbar. Selecting one of the errors will close the viewer and display the section of logic
containing the problem.
The list can be printed using the “Print” button in
the lower left of the dialog box.
Include trace information
The compiler generates markers in the code for
the troubleshooting of compiler or controller errors.
Normally, for faster execution of the program,
this would not be selected. If a non-logical
error is occurring this could be used to aid in
troubleshooting.
LOGIC EDITOR • EDIT MENU