User levels, Point display, Eagle quantum premier devices – Det-Tronics S3 Graphics User Manual
Page 221
12-106
EAGLE QUANTUM PREMIER DEVICES
Version 6.0
EAGLE QUANTUM PREMIER DEVICES
User Levels
The “User Level Editor...” provides a means for limiting access to the “Acknowledge”, “Remove”, and “Inhibit”
buttons for the module which are accessible from the devices point display.
The default value is “0” and provides access to
all users. Change these values to match a user
account configuration and security needs.
Point Display
The IDC has a custom “Point Display” that can be
accessed from either the Point Display button on the Command Bar or from the Online Mode.
The point display provides a single window view of all available real-time data for the device. The top right
quadrant of the display shows the last eight alarms (channel activation) with their date and time data.
The bottom half of the point display
provides a data display area and
annunciator for the two input channels.
Inhibit Buttons
Each input has an inhibit button that can
be used to disable that channels status
from reaching the user logic program in
the EQP controller.
IDC • USER LEVELS