Det-Tronics S3 Graphics - Manual (Page 121)

12-6 EAGLE QUANTUM PREMIER DEVICES
Version 6.0
EAGLE QUANTUM PREMIER DEVICES
The primary reason for this feature is to accommodate instances where the controller must be mounted inside
another enclosure and the faceplate buttons are brought through the door to allow operation while inside.
Typically a window allows viewing of the controller’s faceplate.
Each point can be logically “inverted” by using the checkbox in the “Static Logic Inverted” column. If the use
of “Static Logic” is required, use the appropriate checkbox to enable this feature on a point-by-point basis and
enter a tagname and description appropriate to the desired function(s).
Relays
Selecting the “Relays” button will open the “Controller Relay Editor...” dialog box. By default the “Static Logic”
functions for each point is disabled and each point is unnamed.
The functions of the static logic functions are self explanatory and mirror the functionality of the controller’s
faceplate LEDs and beeper. If the use of “Static Logic” is not required, use the appropriate checkbox to enable
this feature on a point-by-point basis and rename the function(s).
EQP CONTROLLER • INPUTS AND RELAYS