Det-Tronics S3 Graphics - Manual (Page 234)

EQP LOGIC EDITOR 13-9 EQP LOGIC EDITOR
Version 6.0
Once created, this global memory point will be available in
the logic editor for use as an input to or output from logic
elements.
Memory Allocation
The amount of memory set aside for each of the five types is adjustable. Clicking the “Memory Allocation” button
at the bottom of the local memory editor dialog box will open the Memory Allocation dialog box.
This dialog box provides five “slider” type adjustments to change
the memory allocation for each type. The default setting is 16
and is adjusted by clicking on the slider and dragging it up or
down until the desired quantity is reached.
Up to 1K (1024) can be allocated for each type of memory. The
minimum like the default value is 16.
To set the memory allocation, move the slider to the approximate
value desired. To set the exact value, observe the digital display
and use the Up/Down arrow keys to change the value one
number at a time.
LOGIC EDITOR • CONTROLLER MENU