Det-Tronics S3 Graphics - Manual (Page 175)

12-60 EAGLE QUANTUM PREMIER DEVICES
Version 6.0
EAGLE QUANTUM PREMIER DEVICES
Gas Type
After entering the desired tagname and miscellaneous information,
select the gas type the detector is being installed to primarily monitor
from the pull-down list.
There are six common hydrocarbon gases that are available in the
detectors memory.
There are three “Reserved” fields for future standard characterizations
and one selection called “Special” which if selected allows a unique
hydrocarbon gas to be defined and downloaded to the detector.
Special Gases
If “Special” is selected as the gas type, the “Special Gas Settings”
area of the editor becomes active and allows for the entry of the gas
coefficients necessary to define the gas.
Once the gas type has been selected, a calibration gas type and method must be chosen.
PIRECL • GAS TYPE