Eqp logic editor – Det-Tronics S3 Graphics User Manual
Page 240
EQP LOGIC EDITOR
13-15
EQP LOGIC EDITOR
Version 6.0
MODBUS Moves
This dialog box allows for the configuration of data moving between a “Modbus RTU Master” system and the
Eagle Quantum Premier controllers memory.
The dialog box uses a tabbed interface with two tabs on the left side representing the two directions data can
flow.
Data to be moved from the MB system into the Premier controllers memory is configured under the “MB to
•
Globals” tab.
Data that will move from the Premier controller to the MB system is configured under the “All to MB” tab.
•
On the right side of the dialog box is a tabbed scrolling list representing configured data tables. In the example
above, there are three tabs, one for each available MB table.
To configure data for movement, select and drag an address from the right hand side and drop it into the “Source”
cell next to the desired “Tagname” in the left hand side.
LOGIC EDITOR • CONTROLLER MENU