Det-Tronics S3 Graphics - Manual (Page 122)

EAGLE QUANTUM PREMIER DEVICES 12-7 EAGLE QUANTUM PREMIER DEVICES
Version 6.0
Option Board
The Eagle Quantum Premier controller is designed to be expandable and is
provided with a slot for an add on circuit board.
Selecting the “Type” drop down menu will display the available options.
If no expansion board is installed select “None”.
If the “ControlNet” expansion board is selected the “ControlNet Mac Address” field will activate allowing data
entry.
The ControlNet option provides redundant communications with Allen-Bradley (or compatible) products that
support this ControlNet.
The ControlNet Mac address can be set in a range from 1 to 99.
IEC 61508
The Eagle Quantum Premier Controller fully supports IEC 61508 SIL 2. Do not check “SIL Controller”
unless the EQP has SIL 2 firmware.
Configure a controller continued...
Across the bottom of the “Configure a controller...” dialog box there are four buttons; Logic, Alarms, User Level
and OK.
Logic
This button launches the S 3 Logic Editor for the Eagle Quantum Premier controller. See section 13 for more
details.
EQP CONTROLLER • OPTION BOARD EQP CONTROLLER • INPUTS AND RELAYS