Det-Tronics S3 Graphics - Manual (Page 30)

4-3 START MONITORING
Version 6.0 ONLINE FKEY FEATURES
Acknowledge (F3)
Silences audible alarms, causes all TAG objects in a “New Alarm” state on the
graphics to go to their “Acknowledged Alarm” state, and can also be configured
to activate a user programmed button.
Active Alarms (F5)
Opens the “Active Alarms” screen that shows any “out of tolerance” conditions.
Using the buttons at the bottom of the screen, these conditions can be sorted
by communication port or viewed all together.
In the example below there are two active ports, Port 1 configured for Triconex
system and Port 3 configured for a Quantum system. On the right side of the
screen are a number of self-explanatory buttons for navigating the list, none
are shown highlighted due to the shortness of the list in the example.
There is a counter at the top right indicating the current number of active alarms.
In the lower right there is a page indicator and buttons for Acknowledging
alarms or exiting the display.
ONLINE FKEY FEATURES