Det-Tronics S3 Graphics - Manual (Page 120)

EAGLE QUANTUM PREMIER DEVICES 12-5 EAGLE QUANTUM PREMIER DEVICES
Version 6.0
User Parameters
This button opens the “User Parameters...” dialog box allowing for their
values to be set. These parameters are intended for use in special
applications utilizing the Allen-Bradley ControlNet interface option.
The use of these parameters is described in the users guide for the
ControlNet option module. In general applications, these parameters
should be “0”.
CAUtIoN
Do not make adjustments to the settings of these parameters without
having detailed knowledge of their operation.
WARNING
Inappropriate use of these parameters could cause unintended
results in controller operation.
Inputs/Relays
The Eagle Quantum Premier controller provides eight unsupervised digital inputs and eight unsupervised relay
outputs. This I/O can be configured to perform pre-assigned “Static Logic” functions or they can be configured
at the users discretion for any desired purpose. All sixteen of these I/O points are accessible by the controller’s
user programmable logic.
Inputs
Selecting the “Inputs” button will open the “Controller Input Editor...” dialog
box. By default the “Static Logic” functions for each point is disabled and
each point is unnamed.
The functions of the static logic functions are self explanatory and mirror
the functionality of the controller’s faceplate buttons.
EQP CONTROLLER • INPUTS AND RELAYS EQP CONTROLLER • SERIAL PORTS