JLG G12-55A AccuPlace Service Manual - Manual (Page 172)

Electrical System
9.54 G10-55A & G12-55A AccuPlace
LIFT VALVE: LIFT DPLOAD:
2
XXXX.X PSI Lift cylinder load pressure differential.
LIFT PRESS-ROD: XXXX.X PSI Pressure reported from Work Port 1 (Rod).
LIFT PRESS-HEAD: XXXX.X PSI Pressure reported from Work Port 2 (Head).
LIFT TEMP-ROD: ±XXXDEG C Temperature reported from Work Port 1 (Rod).
LIFT TEMP-HEAD:
2
±XXXDEG C Temperature reported from Work Port 2 (Head).
LIFT COIL 1 CMD:
2
XXXXmA Current commanded to Lift Coil 1.
LIFT COIL 1 FDBK:
2
XXXXmA Current returning from Lift Coil 1.
LIFT COIL 2 CMD:
2
XXXXmA Current commanded to Lift Coil 2.
LIFT COIL 2 FDBK:
2
XXXXmA Current returning from Lift Coil 2.
LIFT COIL 3 CMD:
2
XXXXmA Current commanded to Lift Coil 3.
LIFT COIL 3 FDBK:
2
XXXXmA Current returning from Lift Coil 3.
LIFT COIL 4 CMD:
2
XXXXmA Current commanded to Lift Coil 4.
LIFT COIL 4 FDBK:
2
XXXXmA Current returning from Lift Coil 4;.
TELE VALVE
2
TELE DPLOAD: XXXX.X PSI Tele cylinder load pressure differential.
TELE PRESS-HEAD: XXXX.X PSI Pressure reported from Work Port 1 (Head).
TELE PRESS-ROD: XXXX.X PSI Pressure reported from Work Port 2 (Rod);.
TELE TEMP-HEAD: ±XXXDEG C Temperature reported from Work Port 1.
TELE TEMP-ROD: ±XXXDEG C Temperature reported from Work Port 2.
TELE COIL 1 CMD: XXXXmA Current commanded to Tele Coil 1.
TELE COIL 1 FDBK: XXXXmA Current returning from Tele Coil 1.
TELE COIL 2 CMD: XXXXmA Current commanded to Tele Coil 2.
TELE COIL 2 FDBK: XXXXmA Current returning from Tele Coil 2.
TELE COIL 3 CMD: XXXXmA Current commanded to Tele Coil 3.
TELE COIL 3 FDBK: XXXXmA Current returning from Tele Coil 3.
TELE COIL 4 CMD: XXXXmA Current commanded to Tele Coil 4.
TELE COIL 4 FDBK: XXXXmA Current returning from Tele Coil 4.
Diagnostics
Submenu
(Displayed on
Analyzer 1
st
Line)
Parameter
(Displayed on
Analyzer 1
st
Line)
Parameter Value
(Displayed on
Analyzer 2
nd
Line)
Description