JLG G12-55A AccuPlace Service Manual - Manual (Page 171)

9.53 G10-55A & G12-55A AccuPlace
Electrical System
ISP: ISP SUPPLY PRESS: XXXX.X PSI System Pressure at Pump Manifold (PS).
ISP LS PRESS:
1
XXXX.X PSI Load Sense Pressure at Pump Manifold (PCLS).
ISP SUPPLY TEMP: ±XXXDEG C Hydraulic Supply Oil Temperature reported at
Pump Manifold.
ISP LS TEMP:
1
±XXXDEG C Hydraulic LS Oil Temperature reported at Pump
Manifold.
PUMP MANFLD CMD: XXXXmA Current command going to Coil 1/Pump Manifold
Valve.
PUMP MANFLD
FDBK
2
XXXXmA Current returning from Coil 1/Pump Manifold
Valve.
RT LIFT ISOL CMD:
2
XXXXmA Current command going to Coil 2/Right Lift
Isolation Valve.
RT LFT ISOL FDB:
2
XXXXmA Current returning from Coil 2/Right Lift Isolation
Valve.
LT LIFT ISOL CMD:
2
XXXXmA Current command going to Coil 3/Left Lift Isolation
Valve.
LT LFT ISOL FDB:
2
XXXXmA Current returning from Coil 3/Left Lift Isolation
Valve.
BOOM RIDE CMD:
2#
XXXXmA Current command going to Coil 4/Boom Ride
Mode Valve.
BOOM RIDE FDB:
2#
XXXXmA Current returning from Coil 4/Boom Ride Mode
Valve.
ISP LIFT VEL:
2
±XX.XX kph Velocity command from ISP for Lift Valve.
ISP TELE VEL:
2
±XX.XX kph Velocity command from ISP for Telescope Valve.
ISP FORK VEL:
2
±XX.XX kph Velocity command from ISP for Fork Valve.
ISP AUX VEL:
2
±XX.XX kph Velocity command from ISP for Auxiliary
Hydraulics part of Fork Valve.
Diagnostics
Submenu
(Displayed on
Analyzer 1
st
Line)
Parameter
(Displayed on
Analyzer 1
st
Line)
Parameter Value
(Displayed on
Analyzer 2
nd
Line)
Description