AEM 30-71XX Infinity Stand-Alone Programmable Engine Mangement System Full Manual - Manual (Page 81)

Hardware 75
© 2014 AEM Performance Electronics
6) Follow the message at the bottom, and turn the ignition switch back ON when instructed to do
so.
7) When the message at the bottom indicates that it’s safe to close the window, click "X” button
on the top right of the window.
For applications that use a stepper motor idle valve, it's important that a full power reset
be done prior to starting the engine. Turn the key off and wait at least 20 seconds
before starting. This will allow the stepper valve to park and reset.