AEM 30-2020 Bosch Injector Plug Kit 4 Pack User Manual
Bosch style injector connector kit

ADVANCED ENGINE MANAGEMENT INC.
2205 126
th
Street Unit A Hawthorne, CA. 90250
Phone: (310) 484-2322 Fax: (310) 484-0152
Http://www.aempower.com
Instruction Part Number: 10-2020
© 2006 Advanced Engine Management, Inc.
BOSCH STYLE INJECTOR
CONNECTOR KIT
The model 30-2020 Bosch Style Injector Connector Kit contains the parts to assemble 4
injector connectors. The kit contains Four Bosch style female injector connectors and 10
contacts (2 extra contacts are included for spares).
IMPORTANT!
The contacts are “Pull to Seat” meaning you must feed the wire through the connector
housing BEFORE you crimp on the contacts. The wire is then pulled back into the
housing and the contact locks in place. The contact cannot be inserted or removed from
the rear (wire side entry) of the housing.
Contacts (10 Included)
Plating
Tin
Plated
Cable Range
1.00 - 0.05 mm2
Outside Cable Diameter
2.40 - 2.03 mm2
Temperature Range
-40 to 125 C
Resistance in mOhms at 20 mV
> 10.0 Ohms
Voltage Drop in mV per amp
> 3.0 Ohms
Housing (4 Included)
Color
Black
Cavities or Contacts
2
Gender
Female
Temperature Range
-40 to 125 C
Resistance at 20 mV
> 10.0 mOhm
Voltage Drop per amp
> 3.0 mV
Exterior Dimensions
27.8L X 29.6W X 20H
Seating Process
Pull To Seat
This product is legal in California for racing vehicles only and should never be used on public highways.