AEM 30-71XX Infinity Stand-Alone Programmable Engine Mangement System Full Manual - Manual (Page 124)

118
© 2014 AEM Performance Electronics
Infinity User Manual
LambdaAfterStartTrim
Units: Coolant Temp vs After Start Time vs Lambda Offset
Description: This table adds an lambda offset from the LambdaTargetTable as soon as the
engine is started. By allowing a slightly richer mixture target, it will keep the engine sound and the
lambda correction to a minimum. The AfterStartTime (X-Axis) breakpoints can be adjusted for a
specific timeframe. Note: It is not a good idea to have anything but a 0 in the last X-axis cell
where the engine is fully warmed up and above. This would add a lambda target offset all the
time.