AEM 30-71XX Infinity Stand-Alone Programmable Engine Mangement System Full Manual - Manual (Page 36)

30
© 2014 AEM Performance Electronics
Infinity User Manual
AEM recommends using the Layout – Append layout function to build customized user layouts.
Start with either the Basic_Tuning, Setup_Protect_Diag or both and append other function
specific tabs as needed depending on the type of testing. Note that the Infinity system logs PC
data very fast, up to 500 Hz in some cases. A very large layout will result in very large PC log files
and (depending on the PC) may take a long time to save and load. It is best to always use the
layout best suited for a particular testing need.
Log Menu
By clicking the Logging drop down menu, the following options are available:
Start PC Logging: When selected from the navigation bar, this data logs all channels.
Stop and Save PC Log: Selecting this option while recording will turn OFF the log. A current
log will be lost once a new log starts. To save a log, be sure to do a Save Session from the File
Menu.
Show all: Selecting this option will show all logs.
Goto live data: Quick function that allows transition from log viewing to live data