AEM 30-2010 Air Temp Sensor Kit User Manual
Air inlet temperature (ait) sensor, Product data, Air inlent temperature (ait) sensor
FEATURES
• Design for Manufacturability
• Cost Effective
• Robust Design
• Few Components & Assembly Processes
• Thermistor Technology
• 100% Calibration Certified
Thermal Time Constant
‡‡
Circuit Schematic
‡ The ratio, at a specified ambient temperature, of the change in the power dissipation of the sensor to the
resultant temperature change of the thermistor. Test medium: silicone oil.
‡‡ The time required for the sensor to achieve 63.2% of its steady state value when subjected to a step change
in ambient temperature [Tc=(Tf-Ti)*63.2%+Ti]. Test medium: silicone oil.
5 V
ECM
Rpull-up
GND
Sensor
A/D
Converter
500
Tc
τ
Sensor Thermal Response
Step Change in Temperature
PERFORMANCE ELECTRONICS
AIR INLENT TEMPERATURE (AIT) SENSOR
PRODUCT DATA
AIR INLET TEMPERATURE (AIT) SENSOR
PART NUMBER 30-2010
Thermal & Electrical Properties
Mechanical Characteristics
Typical Voltage Supply
Operating Temperature
Resistive Range(Ω
Dissipation Constant
‡
Thermal Time Constant
‡‡
Accuracy
200 kPa
5Vdc
-40°C to 135°C
See Table
N/A
< 15 seconds
See Table
)
Sensor Body Material
Connector
Hex Size
Thread Size
Sealing Pressure
Installation Torque
Overall Weight
Brass Housing
PBT 30% GF
18.90mm (3/4”)
3/8” - 18 NPT
20 N-m, dynamic
33.3g
Basket
PBT 40% GF