AEM 30-71XX Infinity Stand-Alone Programmable Engine Mangement System Full Manual - Manual (Page 27)

Software 21
© 2014 AEM Performance Electronics
Upgrade firmware...:
The firmware update process is described in
Firmware Update under the Infinity ECU
Hardware section.
Lock with password:
Table data can be locked with a password on an individual channel basis.
Click the Set button to select channels.
This dialog allows the user to select channels for password protection. Manually select channels
by left clicking on the check box or alternately by using the arrow keys to scroll through the list and
the space bar key to select. Lists can be saved for later use by using the Save button. The Load
button will load previously saved lists of channels. The Append button will append a different list
of channels onto the existing list of selected channels. Enter and confirm the password to set.
73