AEM 30-2400 Boost Control Solenoid Kit - Manual

ADVANCED ENGINE MANAGEMENT INC.
This product is legal in California for racing vehicles only and should never be used on public highways.
Advanced Engine Management, 2205 126 th Street Unit A Hawthorne, CA. 90250, Phone: (310) 484-2322 Fax: (310) 484-0152
Instruction Part Number: 10-2400,
© 2008 Advanced Engine Management, Inc.
BOOST CONTROL SOLENOID
AEM P/N 30-2400
The model 30-2400 Boost Control Solenoid is specially modified for use as a boost control solenoid in high boost
automotive systems. The kit includes all the necessary fittings to plumb your wastegate for either an internal or external
wastegate.
The 30-2400 Kit Contains:
1x Fast Response Solenoid
1x Mating Connector Assembly
1x 1/8” NPT Sintered Muffler
2x 1/8” NPT to 3/16” Hose Barb Adapters
Operating Voltage: 12VDC
Operating Frequency: 31hz
Duty Range: 10 to 90%
Max Pressure: 120 PSI
Electrical Connection: Polarity is unimportant. Hook
one wire to switched 12 Volts and the other to the AEM
EMS’s PW2 output or the driving devices boost control
line. NOTE: on the SRT4 EMS 30-1510 PW2 outputs +12V.
Hook up one wire to PW2 and one wire to ground.
If you are not sure please refer to your EMS instructions/pin
out sheet and verified the polarity output on PW2.
When energized, ports 1 & 2 are connected, when
de-energized, ports 2 & 3 are connected. The port
numbers are clearly noted on the solenoid body.