beautypg.com

AEM 30-71XX Infinity Stand-Alone Programmable Engine Mangement System Full Manual User Manual

Page 155

background image

Tuning Guide

149

© 2014 AEM Performance Electronics

Lean Protection Minimum Throttle (% ):
Only lean conditions above this set throttle position will be monitored for the lean
protection feature.
Min value = 0, Max value = 100, Resolution = 1.0

Lean Protection Activation Delay:
This can be used to cancel out any false spikes caused by excessive EMI signal noise.
Min value = 0, Max value = 2000, Resolution = 1.0

Lean Protect Rev Limit (RPM):
This sets the engine speed limit when the lean protection is triggered.
Min value = 0, Max value = 20000, Resolution = 1.0