Boss Audio Systems GT-10B - Manual (Page 99)

99
Chapter 7 Using the GT-10B Connected to a Computer Via USB
Chapter
7
In the computer application, set the audio output port to the GT-10B.
You can use the GT-10B to apply effects to the audio data played by the computer, then record the data again with the computer.
Use this process when, for example, you want to add effects to existing audio data.
Applying GT-10B Effects to a Computer’s Audio Playback
1. The SYSTEM MENU screen appears.
2.
Select INPUT/OUTPUT.
3. The INPUT/OUTPUT screen appears.
4.
Select the INPUT SELECT (page 1) screen.
5.
Set the INPUT SELECT parameter to USB In. • Set the software so audio is not passed through
it.
• Set the Dir.Monitor parameter to On.
Parameter/
Range
Explanation
Bass 1–3 Effects are applied to the signals input via the INPUT jacks.
USB In Effects are applied to the signals input via USB.
SYSTEM
GT-10B_e.book 99 ページ ２００８年２月２６日 火曜日 午後３時３０分