Boss Audio Systems GT-10B - Manual (Page 77)

77
Chapter 5 Making Global Settings
Chapter
5
This setting determines whether or not the EXP Pedal operational status is carried over to the next patch when patches are
switched.
EXP Pedal Hold does not function if the Assign Source mode is set to Toggle (whereby the value is toggled between Min and Max each time the pedal is pressed).
Having Values from an EXP Pedal Carried Over When
Patches are Called Up (EXP Pedal Hold)
1. The SYSTEM MENU screen appears.
2.
Select PLAY OPTION.
3. The PLAY OPTION screen appears.
4.
Move the cursor to EXP Pdl Hold.
5. Set whether EXP Pedal Hold is used or not.
Value Explanation
Off
The EXP Pedal status is not carried over.
(Example)
If a patch is switched while the volume is being controlled with an EXP Pedal, the volume of the subsequent patch
is adjust to the value set in that patch.
If the EXP Pedal is operated, and that information is transmitted to the GT-10B, the volume will change in accord
with the pedal’s movement.
On
The EXP Pedal status is carried over.
(Example)
If a patch is switched while the volume is being controlled with the EXP Pedal, the volume of the subsequent patch
will take on the value determined by the current pedal position (angle).
If the patch switched to has the EXP Pedal controlling the wah effect, then the volume assumes the value set in the
patch, and the patch’s wah effect is given the value derived from the current pedal position (angle).
SYSTEM
GT-10B_e.book 77 ページ ２００８年２月２６日 火曜日 午後３時３０分