Boss Audio Systems GT-10B - Manual (Page 88)

88
Chapter 6 Using the GT-10B with External MIDI Devices Connected
When switching patches using Program Change messages transmitted by an external MIDI device, you can freely set the
correspondence between Program Change messages received by the GT-10B and the patches to be switched to in the “Program
Change Map.”
When setting MIDI Omni Mode (p. 85) to “Omni Off,” be sure to have the MIDI Rx Channel (p. 84) set beforehand to the match the transmit channel of the external
MIDI device.
This setting determines whether patches are switched according to the Program Change Map settings, or to the default settings.
Set the correspondence between Program Change messages received and the patches to be switched.
Setting the Correspondences Between Program Change
Messages and Patches (Program Change Map)
Enabling/Disabling the Program Change Map Settings (MIDI Map
Select)
1. Follow the procedure in “Making the Settings for MIDI Functions” (p. 84) to
move the cursor to “Map Select.”
2. Set the desired
value.
Fix
This deactivates the Program Change Map.
Switches to the patches according to the default set-
tings.
Prog
This activates the Program Change Map.
Switches to the patches according to the Program
Change Map.
Setting the Program Change Map
1. The SYSTEM MENU screen appears.
2.
Select MIDI.
3. The MIDI MENU screen appears.
4.
Select PROGRAM MAP.
The Program Change Map settings are disabled
when Map Select is set to “Fix.”
5.
The PROGRAM MAP screen appears.
SYSTEM
GT-10B_e.book 88 ページ ２００８年２月２６日 火曜日 午後３時３０分