Boss Audio Systems GT-10B - Manual (Page 66)

66
Chapter 5 Making Global Settings
This controls the overall reverb level settings in the individual patches. This is effective for adjusting to the acoustics of the
performance venue.
This setting does not affect the individual patch settings.
This has no effect on patches in which the reverb is turned off.
Controlling the Overall Reverb Level (Total REVERB)
1. The SYSTEM MENU screen appears.
2.
Select INPUT/OUTPUT.
3. The INPUT/OUTPUT screen appears.
4.
Select the TOTAL (page 3) screen.
5. Move the cursor to Rev Level.
6. Adjust the reverb level.
Set to “100%” when using this in individual patch
settings.
For information on the parameters, refer to “Rev
Level (Reverb Level)” (p. 135).
SYSTEM
GT-10B_e.book 66 ページ ２００８年２月２６日 火曜日 午後３時３０分