Ez tone, Step1: tone, Step2: drive – Boss Audio Systems GT-10B User Manual
Page 134: System, Tuner, Input/output, Step1: tone step2: drive, Tuner input/output, 134 chapter 8 parameters guide
134
Chapter 8 Parameters Guide
This feature allows you to make tone settings based on the
equipment you are using and the tonal image you want to
create.
Used for making settings related to the GT-10B’s operating
environment.
EZ TONE
STEP1: TONE
Parameter/
Range
Explanation
BASIC TONE
BASIC TONE lets you create sounds easily by choosing set-
tings close to the musical genre and the feel of the song you
want to compose.
POP
Pop sound
ROCK
Rock sound
METAL
Metal sound
PUNK
Punk sound
R&B
Rhythm&Blues sound
FUNK
Funk sound
JAZZ
Jazz sound
SOLO
For solo play
SYNTH
Synth Bass
STEP2: DRIVE
Parameter/
Range
Explanation
EDGE
Produces a crisp, distinctive tone.
SMOOTH
Produces a smooth, warm tone.
SOFT
The distortion or the compression effect be-
comes mild.
HARD
The distortion or the compression effect be-
comes strong.
SYSTEM
TUNER
Parameter/
Range
Explanation
PITCH
435Hz–445Hz
This sets the reference pitch.
OUTPUT
Mute
The tuning sound is not output.
Bypass
The tuning sound is output.
• When OUTPUT is set to “Bypass,” and Tuner is
set to ON, you can adjust the volume of the direct
sound by operating the EXP Pedal.
• OUTPUT is set to “Bypass” when shipped from
the factory.
INPUT/OUTPUT
Parameter/
Range
Explanation
INPUT SELECT
Bass 1–
Bass 3,
USB In
You can store three separate tone configurations
tailored to the basses you intend to connect (Bass 1
through 3). Select USB In when you’re inputting au-
dio from a computer via USB.
INPUT
LEVEL
-20–+20dB
Input volume from input jack.
PRES. (Presence)
-20–+20dB
Adjusts the ultra high frequency range tone.
GLOBAL EQ
Low Gain
-12–+12dB
Adjusts the low frequency range tone.
Mid Gain (Middle Gain)
-12–+12dB
Adjusts the middle frequency range tone.
Mid Freq (Middle Frequency)
20.0Hz–
10.0kHz
Specifies the center of the frequency range that will
be adjusted by the Mid Gain.
Mid Q (Middle Q)
0.5–16
Adjusts the width of the area affected by the EQ
centered at the Mid Freq.
Higher values will narrow the area.
High Gain
-12–+12dB
Adjusts the high frequency range tone.
GT-10B_e.book 134 ページ 2008年2月26日 火曜日 午後3時30分