Boss Audio Systems GT-10B - Manual (Page 28)

28
Chapter 1 Outputting Sounds
How to Tune
1. Play a single open
note on the string
being tuned.
The Note Name closest to the pitch of the
string that was played appears in the
display.
Only play a single note on the one string being tuned.
2. Tune the string until
the string name
appears in the
display.
3. Keep checking the
Tuning Guide, tuning
until the center
indicator lights up.
4. Repeat Steps 1–3 until all of the strings are tuned.
Changing the Tuner Settings (Tuner Pitch)
1. Turn on the Tuner.
2. Move the cursor to PITCH.
3.
Change the reference pitch.
• The frequency of A4 (the middle A on a piano
keyboard) played by an instrument (such as a
piano) that provides the pitch to which the
other instruments refer in tuning before a
performance begins is called the reference
pitch.
• This is set to 440 Hz when shipped from the
factory.
Range Explanation
435Hz–445Hz This sets the reference pitch.
• General Four-String Bass
• General Five-String Bass
• General Six-String Bass
4th 3rd 2nd 1st
Regular E A D G
1/2 Step Down D G C F
1 Step Down D G C F
5th 4th 3rd 2nd 1st
Regular B E A D G
1/2 Step Down A D G C F
1 Step Down A D G C F
6th 5th 4th 3rd 2nd 1st
Regular B E A D G C
1/2 Step Down A D G C F B
1 Step Down A D G C F A
GT-10B_e.book 28 ページ ２００８年２月２６日 火曜日 午後３時３０分