Boss Audio Systems GT-10B - Manual (Page 63)

63
Chapter
5
Chapter 5 Making Global Settings
The GT-10B includes a feature for adjusting the tone to suit whatever Bass you have connected, allowing you to make settings for
three bass types (Bass 1–3). This is effective when you are connecting a different bass from the one used when the patch was
created.
When adjusting the input level and input presence, the input signals for all patches are affected. Note that the nuances of the effect sounds that occur in response to
bass volume may change, particularly with patches in which effects are controlled by the bass volume.
Making Settings Matched to the Connected Bass (Input Select)
1. The SYSTEM MENU screen appears.
2.
Select INPUT/OUTPUT.
3.
The INPUT/OUTPUT screen appears.
4. Select the INPUT SELECT (Bass 1–3) you want to set.
Select USB In when you’re inputting audio from a
computer via USB (p. 134).
5.
P2 knob: Adjusts the bass input level.
P3 knob: Adjusts the tonal quality of the bass’s high end.
For information on the parameters, refer to
“INPUT” (p. 134).
SYSTEM
GT-10B_e.book 63 ページ ２００８年２月２６日 火曜日 午後３時３０分