Boss Audio Systems GT-10B - Manual (Page 69)

69
Chapter 5 Making Global Settings
Chapter
5
You can select the signals to be output from the SUB OUTPUT (XLR) jacks.
Switching the SUB OUTPUT Jacks Signals
1. The SYSTEM MENU screen appears.
2.
Select INPUT/OUTPUT.
3. The INPUT/OUTPUT screen appears.
4.
Select the SUB OUTPUT (page 4) screen.
5. Move the cursor to Mode.
6. Select the Mode you want to set.
Value Explanation
L/R
The GT-10B’s stereo output is output as is, without change.
Set to L/R when recording in stereo or sending stereo signals to a PA.
Effect/Direct
Output from SUB OUTPUT L jack is the GT-10B’s stereo output mixed to mono, output from SUB OUTPUT
R jack is the sound before effect (mono) directly.
The INPUT SELECT, INPUT LEVEL and PRES. parameters are enabled in the input sound.
For recording, you can record the direct bass sound on a separate channel, then later on you can remix the direct sound with
the effect sound during mixdown.
SYSTEM
GT-10B_e.book 69 ページ ２００８年２月２６日 火曜日 午後３時３０分