Boss Audio Systems GT-10B - Manual (Page 60)

60
Chapter 4 Playing Sounds
Deleting a Phrase (CLEAR)
The procedure for deleting a phrase differs according to the setting of the Clear Pdl parameter.
For information on the Clear Pdl parameter, refer to “Clear Pdl (Clear Pedal Function)” (p. 61).
You can also enable different uses by changing the parameters.
When the Clear Pdl parameter is “Clear Only” When the Clear Pdl parameter is “Mute/Clear”
1.
The phrase is deleted and the
unit goes into recording
standby.
1.
Pressing this during recording stops recording and puts
the unit in muted playback. (The PLAY indicator flashes.)
No sound is produced, but loop play continues inside the
GT-10B.
Pressing [BANK ▼ ] while the unit is muted enables normal loop
playback. (The PLAY indicator lights up.)
2.
Pressing this while the sound is muted deletes the phrase
and puts the unit in recording standby.
Setting Phrase Loop
1. The SYSTEM MENU screen appears.
2.
Select PHRASE LOOP.
3.
The PHRASE LOOP screen appears.
4. Move the cursor to select the parameter you wish to change.
5. Change the parameter settings.
SYSTEM
GT-10B_e.book 60 ページ ２００８年２月２６日 火曜日 午後３時３０分