Boss Audio Systems GT-10B - Manual (Page 101)

101
Chapter 8 Parameters Guide
Chapter
8
*1 Setting available with Type set to BOSS Comp or D-Comp.
*2 Setting available with Type set to BOSS Limitr, Rack 160D, or Vtg
Rack U.
*3 Setting available with Type set to Multi Band.
*4 Setting available with Type set to Natural.
This effect distorts the sound to create long sustain.
It provides 12 types of distortion settings.
Xover f H (Crossover Frequency High) *3
2.50kHz–
10.0kHz This sets the frequency dividing the high- and
ultra high-frequency ranges.
Drive *4
0–100
Adjusts the range (time) over which low-level
signals are boosted. Larger values will result in
longer sustain.
Tone
-50–+50 Adjusts the tone.
Level
0–100 Adjusts the volume.
Parameter/
Range Explanation
OD/DS
(Overdrive/Distortion)
Parameter/
Range Explanation
OD/DS (Overdrive/Distortion ON/OFF)
Off, On
Turns the OD/DS effect on/off.
Pressing [OD/DS] switches On and Off.
Type
Selects the type of distortion.
Booster
This not only functions as a booster, but also
produces a clean tone that has punch even
when used alone.
Natural
This is an overdrive sound that provides distor-
tion with a natural feeling.
Bass Driver
Models the TECH21 SANSAMP BASS DRIVER
DI.
Bass OD Overdrive tuned especially for use with basses.
Blues OD
This is a crunch sound of the BOSS BD-2.
This produces distortion that faithfully repro-
duces the nuances of picking.
Bass DS Distortion tuned especially for use with basses.
GUV DS This models a Marshall GUV’ NOR.
Bass MT Wild, radical distortion sound.
Metal Zone
This is the sound of the BOSS MT-2.
It produces a wide range of metal sounds, from
old style to slash metal.
Bass FUZZ Fuzz tuned especially for use with basses.
MUFF FUZZ This models an Electro-Harmonix Big Muff π .
HiBandDrive
With this effect, distortion is applied only to the
high frequency sounds, and not to the sounds
in the low frequency range.
Drive
0–100 Adjusts the depth of distortion.
Tone
-50–+50 Adjusts the tone.
EffectLev (Effect Level)
0–100 Adjusts the volume of the OD/DS sound.
DirectLev (Direct Level)
0–100 Adjusts the volume of the direct sound.
BottomLev (Bottom Level)
0–100
Extracts the low-frequency components of the
sound input to this effect, and adjusts the
amount added to the effect sound.
MONO
GT-10B_e.book 101 ページ ２００８年２月２６日 火曜日 午後３時３０分