ADTRAN 1248 - Manual (Page 73)

Menu Descriptions
61179641AL4-5B 5-21
Create a New PVC/PVP Screen
Create New PVC/PVP
Main Menu \ ATM Circuit Management \ PVC/PVP Management \Create New PVC/PVP\
The Create a New PVC/PVP screen (see Figure 5-12 ) is used to create the PVC/PVPs for ADSL
connections. Each ADSL connection has at least one PVC/PVP per ATM circuit provisioned for
data flow. PVC/PVPs map ATM circuits from the network to the ADSL ports.
Figure 5-12. Create a New PVC/PVP Screen
The Create a New PVC/PVP screen fields are shown in Table 5-7 .
Table 5-7. Create a New PVC/PVP Screen Fields
Field Description
Endpoint 1 Port This field displays the network port.
Endpoint 1 VPI This field displays the Virtual Path Identifier for the ATM port
from the Network. Valid values range from 0 to 4095.
Endpoint 1 VCI This field displays the Virtual Channel Identifier for the ATM
port from the network. Valid values range from 0 to 65535.
Endpoint 2 Port This field displays the ATM port that is being created. Valid
values range from 1 to 48.
Endpoint 2 VPI This field displays the Virtual Path Identifier for the ATM port.
Valid values range from 0 to 4095.
Endpoint 2 VCI This field displays the Virtual Channel Identifier for the ATM.
Valid values range from 0 to 65535.
Create a New PVC/PVP
Endpoint 1 (Net --> Cust) Endpoint 2 (Net <-- Cust)
Port VPI VCI Port VPI VCI
Netw 35 1000 1 0 35
____________________________________________________________
Service Pkt Discard PCR
UBR Enabled Best Effort
Circuit ID
N/A
____________________________________________________________
When finished, place cursor here to select action:
Create new circuit and return to PVC/PVP Management
NOTE: No changes will take effect until an action is selected and executed.
To Select an action, place the cursor over the Action option and press the
Space Bar. To execute the action, press Enter.
Enter a VPI value between 0 an 4095.