ADTRAN 1248 - Manual (Page 61)

Menu Tree
61179641AL4-5B 5-9
* After creating a profile, provisioning is not updated until the profile changes from Inactive to Active. To unassign
ports on a profile, simply change the state to Inactive and change the ports to “0” and this removes them.
MENU TREE
There are a number of menu screens designed to aid in the maintenance and troubleshooting
of the Total Access 1248 system. A menu tree is a visual map that can be used to locate
configuration information and provisioning options. The menu trees for the Total Access 1248
are listed below and can be found on the indicated pages:
• Total Access 1248 Main Menu Tree , Figure 5-3 on page 5-10
• System Management Menu Tree , Figure 5-4 on page 5-11
• Network Port Menu Tree , Figure 5-5 on page 5-13
• DSL Menu Tree , Figure 5-6 on page 5-14
T This hot key is used to display events in time ascending/descending order.
V This hot key is used to toggle between displaying the connection method and
associated user name for each event, or the IP address for each event.
Y This hot key is used to display security events.
Table 5-2. Menu Specific Hot Keys (Continued)
Hot Key Description