ADTRAN 1248 - Manual (Page 170)

Total Access 1248 Octal T1 IMA DSLAM with Modem Installation and Maintenance Practice
5-118 61179641AL4-5B
Operation Mode for Facility Menu
Operation Mode for Facility
Main Menu \ Network Port \ IMA Main Menu \ IMA Provisioning \ IMA Facility Provisioning \ IMA All Facilities Provisioning \Operation
Mode for Facility\
The Operation Mode for Facility menu (see Figure 5-81 ) provides options for the operation
mode for each IMA facility.
Figure 5-81. Operation Mode for Facility Menu
The Operation Mode for Facility menu options are shown in Table 5-83 .
Table 5-83. Operation Mode for Facility Menu Options
Option Description Function
1 IMA_Group This option is used to add a facility to the IMA group.
2 Unassigned This option is used to remove a facility from the IMA
group.
3 Pass Thru This option is only available for facility #1. This option is
used to allow ATM transport over a single facility without
the IMA layer.
TID: TA1248 Total Access 1248 MM/DD/YY HH:MM
Unacknowledged Alarms: None
Operation Mode for Facility for # 1 IMA_Group
1. IMA_Group
2. Unassigned
3. Pass Thru
'N' - Next IMA Facility 'P' - Previous IMA Facility
Selection :
'?' - System Help Screen