ADTRAN 1248 - Manual (Page 137)

Menu Descriptions
61179641AL4-5B 5-85
Reset System Menu
Reset System
Main Menu \ System Management \Reset System\
The Reset System menu (see Figure 5-53 ) is used to reboot the entire system.
CAUTION
This action is service affecting. If the system is accessed remotely
through a static IP address, the system resets and access is lost
until the system reboot is completed.
When the Reset System option is selected, the system resets the
host unit and all client units without additional prompting.
Figure 5-53. Reset System Menu
The Reset System menu options are shown in Table 5-54 .
Table 5-54. Reset System Menu Options
Option Description Function
1 Reset This option reboots the Total Access 1248. All system
options are retained.
2 Exit This option returns the display to the “System
Management Menu” on page 5-47. The system does not
reboot.
TID: TA1248 Total Access 1248 MM/DD/YY HH:MM
Unacknowledged Alarms: None
Reset System
WARNING! THIS IS SERVICE AFFECTING!
This option resets the entire system.
All system parameters will be retained.
Reset occurs immediately.
1. Reset
2. Exit
Selection :
'?' - System Help Screen