ADTRAN 1248 - Manual (Page 127)

Menu Descriptions
61179641AL4-5B 5-75
SNMP Trap Hosts Menu
SNMP Trap Hosts
Main Menu \ System Management \ SNMP/TL1 Configuration \SNMP Trap Hosts\
The SNMP Trap Hosts Menu (see Figure 5-47 ) is used to set multiple IP Addresses (trap desti-
nations) and SNMP versions for notification of a trap. A trap is an automatic alert, or notifi-
cation, sent to an IP Address. The Total Access 1248 system forwards SNMP traps to all
configured hosts as the traps occur.
Figure 5-47. SNMP Trap Hosts Menu
The SNMP Trap Hosts menu options are shown in Table 5-47 .
Table 5-47. SNMP Trap Hosts Menu Options
Option Description Function
1 IP Address This option is used to configure the first SNMP trap host
IP address in decimal dot format (i.e., ###.###.###.###).
2 Version This option is used to configure the SNMP version for the
first SNMP trap host. Options include the following:
• SNMPv1
• SNMPv2
3 IP Address This option is used to configure the second SNMP trap
host IP address in decimal dot format (i.e.,
###.###.###.###).
TID: TA1248 Total Access 1248
Unacknowledged Alarms: None
SNMP Trap Hosts
Set IP address to enter Trap Host. Set IP address to D to delete Trap Host
1. IP Address 0.0.0.0
2. Version
3. IP Address 0.0.0.0
4. Version
5. IP Address 0.0.0.0
6. Version
7. Trap Port 162
Selection :
'?' - System Help Screen