ADTRAN 1248 - Manual (Page 201)

Menu Descriptions
61179641AL4-5B 5-149
NOTE
Use N for next port or P for previous port to select the port to be
provisioned.
Service State for ADSL Card Menu
Service State for ADSL Card
Main Menu \ DSL Menus \ DSL Provisioning \ Port Provisioning \Service State for ADSL Card\
The ADSL Card Service State option on the Port Provisioning Menu displays the Service State
for ADSL Card menu, which refers to the ADSL card that is located on the main circuit board
of the Total Access 1248 system.
The Service State for ADSL Card menu options are shown in
Table 5-103 .
Service State for Port: # Menu
Service State for Port: #
Main Menu \ DSL Menus \ DSL Provisioning \ Port Provisioning \Service State for Port: #\
The Line Service State option on the Port Provisioning Menu displays the Service State for Port
# menu. The # represents the value displayed for the Select Port option. The default value for
the Line Service State is Out of Service-Maintenance.
The Service State for Port: # menu options are shown in
Table 5-104 .
Table 5-103. Service State for ADSL Card Menu Options
Option Description Function
1 In Service This setting indicates that ADSL services are available, if
installed, and Link Down and Threshold alarms are
reported, if enabled.
2 Out of Service-Unassigned This setting indicates that no ADSL services are
available and Link Down and Threshold alarms are not
reported.
3 Out of Service-Maintenance This setting indicates that ADSL services are available
and Link Down and Threshold alarms are not reported.
Table 5-104. Service State for Port: # Menu Options
Option Description Function
1 In Service This setting indicates that an ADSL modem is allowed to
train up and alarms are reported, if enabled.
2 Out of Service-Unassigned This setting indicates that an ADSL modem is not
allowed to train up and alarms are not reported.
3 Out of Service-Maintenance This setting indicates that an ADSL modem is allowed to
train up and alarms are not reported.