General information – RADWAG MYA 5.3Y.F1 Microbalance User Manual
Page 8

- 8 -
1. GENERAL INFORMATION
INTENDED USE
Balances 3Y series are intended to precise mass measurement of weighed
loads conducted in laboratory conditions.
PRECAUTION MEASURES
Before first use of the balance, it is highly recommended to carefully
read this User Manual, and operate the balance as intended.
Do not operate the touch panel using sharp edged tools (knife,
screwdriver, etc.).
Place weighed loads in the center of the weighing pan.
Load the weighing pan with loads, gross mass of which does not exceed
instrument’s measuring range (maximum capacity).
Do not leave heavy loads on the weighing pan for a longer period of
time.
In case of defect immediately unplug the instrument from mains.
Balances to be decommissioned, should be decommissioned in
accordance with valid legal regulations.
Do not use the balance is areas endangered with explosion. The 3Y
series is not designed to operate in EX zones.
WARRANTY CONDITIONS
A. RADWAG feels obliged to repair or exchange all elements that appear to be
faulty by production or their construction,
B. Defining defects of unclear origin defects and means of their elimination can
only be realized with assistance of manufacturer and user representatives,
C. RADWAG does not bear any responsibility for defects, losses or accidents
resulting from unauthorized or inadequate performing of production or
service processes,
D. Warranty does not cover:
•
Mechanical defects caused by product exploitation other than intended,
defects of thermal and chemical origin, defects caused by lightning,
overvoltage in the power network or other random event,
•
Balance defects if it is utilized contrary to its intended use,