Clients – RADWAG MYA 5.3Y.F1 Microbalance User Manual
Page 127

- 127 -
•
Enter submenu <
Databases>
•
Enter database of < Weighing records> and press desired entry
(record).
List of parameters for a weighing record saved in the database:
1. Measurement date
2. Measurement result
3. Tare value
4. Determination of measurement status (stable / unstable)
5. Product name
6. User
7. Client, Client name
8. Working mode name
9. Warehouse, name of source warehouse
10. Packaging, name of tare applied during weighing product’s
weighing process
11. Result control, information on threshold in which the weighed
product was placed:
MIN – below LOW threshold (possible only if
set to NO>)
OK – between the LOW and HIGH thresholds,
MAX – above HIGH threshold (possible only if
set to NO>),
12. Weighing platform no., field denoting number of a weighing
platform (balance/scale) on which a measurement was carried out,
13. Levelling, demonstrates if level status was maintained during
measurement,
14. Ambient conditions alerts, demonstrates if temperature and
humidity were stable during measurement.
27.4. Clients
Database of Clients contains name of Clients for whom the measurements are
carried out.
Procedure
•
Enter submenu < Databases>, and press < Clients> field
•
Press <
Add > key
•
If a client already exists in the database of clients, press field with its name
List of parameters defined for a client:
1. Client name
2. Client code [internal code identifying a client]
3. VAT no. [tax identification no.]
4. Address
5. Postal code
6. City
7. Discount
8. Printout [type of printout, label declared to a client]