Introducing a series to the database of series – RADWAG MYA 5.3Y.F1 Microbalance User Manual
Page 106

- 106 -
25.3. Introducing a series to the Database of Series
Database of series comprises series and samples which are components of a
series.
While creating a series, first set its name, and then add samples to the
created series. The software operates intuitively, and commands a user to
follow displayed information.
Specify a name for each sample. Adding a series to the database can be
carried out from the level of differential weighing mode or from the level of
Database.
Procedure:
•
Enter submenu < Databases>, press < Series> field
•
Press <
Add > soft key, should a series be added
The software automatically adds a new entry to the database and enters its
editing mode. Insert all parameters of a new series.
List of parameters defined for a series:
1. Name: press “Name” field, a window opens for inserting name of a
series
2. Code: for inserting series code
3. Client: enables selecting a client for whom the measurements in a
series are carried out
4. Samples: pressing this field opens a window with list of samples (in
case of a new series the list is empty), add new samples:
a. Press <
Add > field, the software automatically adds a new entry
to the list. Name of a sample is given automatically (it is editable).
5. Number of samples on edited process, it is updated in real time by the
software on adding a new sample to a series.
Each added sample on the list has its current differential weighing status
displayed (weighing phase carried out for a sample).
Newly added samples do not have a status assigned – the field is empty. The
status is updated in real time after completing each phase of sample’s
weighing process.