Working mode selection, Parameters relating to working mode – RADWAG MYA 5.3Y.F1 Microbalance User Manual
Page 47

- 47 -
Differential weighing
Means of operation: analysis of mass sample change over
time.
Statistical Quality Control
Working mode is intended to carrying out different types of
product packing processes and aimed at monitoring and / or
controlling the packing process. It enables detecting excess or
lack of product quantity in a packaging.
The settings of separate working modes include special functions specific to a
mode. They enable adapting mode’s operation to user’s individual needs. The
special settings are activated on selecting a corresponding profile. A detailed
description of special functions is provided while presenting each of working
modes.
15.1. Working mode selection
Changing working mode:
o
Press name of active working mode, displayed in the left corner of the
upper bar.
o
List of available working modes is displayed,
o
Select name of a desired working mode, and press it.
15.2. Parameters relating to working mode
Each working mode has programmable parameters determining its
functioning. Procedure of determining these parameters:
1. Press grey coloured workspace area.
2. Below menu is displayed:
o
o
o
o
o
operation,