RADWAG MYA 5.3Y.F1 Microbalance - Manual (Page 14)

- 14 -
4. STARTUP
•
On plugging the balance to mains, instrument’s diode ON/LOAD
located on indicator’s housing is lit up.
•
Press powering key located on the upper left section of terminal’s
overlay. Within a few seconds, the OS Windows CE and RADWAG
software start loading, which is signalled by flickering red diode
ON/LOAD.
•
On completing the startup procedure, the instrument’s displays main
window of the balance software.
•
The balance starts up with no user logged in. In order to start operation,
a user has to log in. (logging procedure is described further in this user
manual).
Caution: Remember to start the balance with no load on the weighing pan.
5. BALANCE KEYBOARD – FUNCTION KEYS
Key Description
Switching the instrument ON / OFF
Zeroing
Tarring
Sending measurement result to a plugged printer or
computer
Function key (entering instrument’s menu)
Working mode selection, (programmable key)
User profile selection, (programmable key)
Internal adjustment, (programmable key)