beautypg.com

RADWAG MYA 5.3Y.F1 Microbalance User Manual

Page 51

background image

- 51 -

GLP report

Signature

Non-standard printout

BASIC PRINCIPLES OF USING PRINTOUTS

1. Press PRINT key on balance’s overlay to print variables that are

contained in section WEIGHING of the standard printout, and if they are

attributed = YES (see above list of variables in printouts).

2. Variables attributed as YES present in the HEADER and FOOTER are

printed ONLY on pressing Print Header and Print Footer soft keys.

The soft keys have to be added to the bottom bar of the display, as

quick access keys.

Adding quick access keys on the bottom bar of the display is described in

point 15.3 of this user manual

Print data from header

Print data from footer

Caution:

Measuring units for printing mass indication:

Net – main measuring unit (adjustment unit)

Tare – main measuring unit (adjustment unit)

Gross – main measuring unit (adjustment unit)

Current result – currently displayed measuring unit

Supplementary unit – supplementary measuring unit

Mass – main measuring unit (adjustment unit)

Non-standard printout

a printout may contain: TEXTS and VARIABLES(which are acquired from

the software on printout).

Each non-standard printout is a separate project, featuring specific name,

by which it is identified, and saved in the database of printouts.


PROCEDURE:

1. Press option ,

2. Press

key,

3. A window is opened with data such as Name/Code/Project,
4. Set name and code of a printout,
5. Press key,

6. A keyboard is opened on the display for editing the printout,