RADWAG MYA 5.3Y.F1 Microbalance - Manual (Page 17)

- 17 -
8. LOGGING
Full access to balance’s parameters and editing databases requires logging to
instrument’s software as an operator with access level. The
logging procedure should be carried out on each switching on the balance.
Log in procedure
•
While in main weighing window of the application, press text
located in the upper window bar, which opens a window with operators
database including < Admin>entry,
•
On entering the < Admin> entry, the software activates on-screen
keyboard for entering operator’s password,
•
Insert password “1111” and accept it by pressing key,
•
The software automatically returns to displaying the main window, and
the display’s upper bar indicates word instead of ,
•
After first logging in, the administrator should add user profiles and set
their corresponding access level (the procedure of assigning access levels
is described further in this user manual, see point 12 and 13).
On future logging in, select a user from the list, and on entering password,
balance’s software initiates operation with access level set for a
corresponding user.
Log out procedure
•
While in main weighing window of the application, press name of a logged
operator located in the display’s upper bar. A window with operators
database is opened,
•
Press soft key (located as position no. 1 in the list of
operators)
•
The software returns to the main window, and the display’s upper bar
indicates word instead of name of a logged operator.
Access levels
3Y series software provides four access levels: administrator, advanced
operator, operator and none (anonymous logging).
On switching on the balance, its display is constantly active, enabling carrying
out mass measuring processes. These measurements, however, cannot be
saved in balance’s database unless a user with at least minimal access level is
logged in. The minimal access level enables carrying out mass measuring
processes and saving them in balance’s databases using available function
keys.