RADWAG MYA 5.3Y.F1 Microbalance - Manual (Page 162)

- 162 -
Autotest results can be exported by pressing field on the level of all
saved reports in a table. Data is sent to a data storage device connected to
balance’s USB port as a file with extension *.csv.
31.12. Start logo
Caution:
Option enabled only for authorized balance operators.
The parameter enables changing a logo that appears on the balance display on
a start-up procedure.
31.13. Export of system events
Caution:
Option enabled only for authorized balance operators.
The parameter enables generating a special type of a file that is automatically
saved on option enabling on a data storage device plugged to balance’s USB
port.
The file is used by RADWAG service for diagnosing any potential problems
occurring during balance operation.
Procedure:
•
Plug a data storage device to balance’s USB port
•
Enter submenu < Other>
•
Select parameter
•
The software generates a file and automatically saves it on the data
storage device
•
The generated file has to be sent to Radwag service personnel.