RADWAG MYA 5.3Y.F1 Microbalance - Manual (Page 64)

- 64 -
PROCEDURE 2 – manual inserting the value of target mass
•
Press < Target value > quick access key
•
In an opened window give the target value and tolerance
•
Return to weighing
Caution:
If the Target Value is acquired from the Database of Products, then fields Target
Value and Tolerance contain data referring to selected product. The data can be
edited and modified.
18.2. Additional settings of dosing mode
The additional settings enable adjusting the working mode to use’s needs and
requirements. To access the setting follow below procedure:
Procedure:
1. Press grey coloured workspace,
2. The display indicates menu of: Settings, Keys, Information, Printout and
Profile,
3. Press key,
4. The display indicates functions related to dosing process: Result control,
Tare mode, Automatic footer printout, Printout mode / Value release,
Printouts
Means of using the above functions are given in point 10.8. “Additional
parameters on weighing process”.